ţţ�淨�r��

What’s new

For all ţţ�淨�r�� App users:

1. Opt-out for critical alerts:

   Added OPT OUT for critical storm alerts as well.

   

For IQ EV Charger users in NA and EU:

1. Enhanced IQ EV Charger connectivity flow:

   Enhanced IQ EV Charger Wi-Fi configuration to show a warning for weak connections.

   

For IQ EV Charger users in Europe:

1. Charging schedule now available on STATUS page:

   Added charging schedule details on STATUS page when the IQ EV Charger is set to Smart Charging mode.

   

What’s Fixed

• Optimized the notification delivery time for critical system updates.
• Fixed blank STATUS page when the gateway hasn’t reported for a few hours.
• Resolved the issue of the Environment card showing zero value for non-English locales.
• [For IQ PowerPack 1500 users] Resolved discrepancy between slider values in the app and the device LCD for “Power Save After” and “Power Off After” settings.
• [For IQ PowerPack 1500 users] Added a cancel button in the Wi-Fi Networks screen when no networks are available.
• [For IQ EV Charger users in Europe] Fixed the issue that prevented EV charging on some sites when IQ EV Charger was in Smart Charging mode.

What’s new

For all installers:

1. Added filters to the parameters that were missing from the System List

   Some parameters in the System List did not have filtering capability until now. Now, users can filter these parameters:

   1. Issue Count
   2. Owner Email
   3. System Size
   4. Current Power
   5. Operational
   6. Interconnection Date
   7. % of estimated (month)
   8. % of estimated (lifetime)

What’s fixed 

1. Fixed the issue of incorrect translations in the IQ Relay Self Test report for the Italian locale shown under the Reports tab.

What’s Fixed

For all ţţ�淨�r�� App users:

• Updated microinverter not reporting logic to notify users only when 10% or more of microinverters are not reporting.

What’s new

For all ţţ�淨�r�� App users:

1. Enhanced gateway connectivity feature

   Users are now shown a warning message if they select a weak Wi-Fi network while configuring Wi-Fi for their gateway.

   

What’s Fixed

For all ţţ�淨�r�� App users:

• Bug fixes and minor enhancements.

What’s new

For all ţţ�淨�r�� App users:

1. Solar Offset metric is now available 

   Added a new performance metric called Solar Offset on the Status and Energy pages. You can also customize the existing Performance metrics by clicking on Manage to show/hide different cards.

   To display this metric on Status and Energy pages, click on Manage and enable Solar Offset.

   

2. Microinverter type now displayed on Array page 

   Enhanced Array page to display microinverter type and details for easier monitoring.

   

For IQ PowerPack 1500 users:

1. View last known settings on app (IQ PowerPack 1500 v6.0.0 and above) 

   Added the last known settings in the app when the device is offline or powered off.

   

2. Weather information now available on the app:

   You can now view weather information based on your site address.

   

   Navigate to MENU > System > Site Details and click on Edit to update your address anytime.

   

3. Periodic wakeup is now available (IQ PowerPack 1500 v6.0.0 and above) 

   Added periodic wakeup for self-update.

For IQ EV Charger users across all regions: 

1. Generate reports with Multiple chargers 

   Added multi-charger support for Daily/Session report generation.

   

For IQ EV Charger users in Europe and UK: 

1. Learn more about Charging modes 

   Added a new Learn More about Charging Modes section explaining the functionality of different charging modes under different profiles.

   

What’s Fixed

• Updated the calculation logic for system backup time to include the battery shutdown level.
• Fixed issue of users receiving outdated events in the monthly report.
• [For users in the UK] Fixed issue preventing users from restarting their system after G100 export limit violation.
• [For IQ PowerPack 1500 users] Corrected display of settings success message.
• [For DAP Illinois users] Fixed issue of incorrectly showing 'Charge battery from grid' for export only systems.

What’s new

For all installers:

1. Added the ability to view the microinverter type on the Array view and Array Builder

   We have provided users with the ability to view the type of microinverter on the array panels on the View tab and Array Builder. When clicking a particular panel, users will also see the microinverter details in the tooltip.

   

   Array map under the ‘View’ tab

   

   Array Builder

2. Added a new Not Reporting device status for the cell modems

   It is misleading to show the cell modem as retired when it has lost connectivity during operation but has not actually retired. So, like other devices like the battery or microinverter, we have added a new Not Reporting device status for the cell modems in addition to the Normal and Retired statuses.

   Note - This will be gradually rolled out to the systems after the eSW-related changes are deployed per Gateway. 

What’s fixed 

1. Resolved the issue of the Grid Profile changes not syncing with the new System List.
2. Fixed the issue of space, case and special character sensitivity for the zip code used during the Transfer of Ownership process.
3. Reduced the severity of some SoC-related events that are expected on the system but caused changes in the system status.

What’s new

For ţţ�淨�r�� App users on Smart Solar Billing plan in Illinois:

1. Updated Electricity Rate Settings

   Users can add and view their Hourly Dynamic Prices by selecting their Utility and Rate Name. Go to Menu > Settings > Electricity Rate

   

2. Updated Battery Settings

   Users can set their batteries to charge from grid or discharge to the grid as per the battery mode set during system commissioning by the installer. Go to Menu > Settings > Battery

   

3. Update Site Details

   Users can view their grid connection details: Connection Type, Connection Year and Battery Mode. Go to Menu > System > Site Details

   

What’s new

For all installers:

1. Improved site search with autocomplete functionality: The app now features intelligent search with autocomplete suggestions, displaying results dynamically as installers type and supporting partial name matches for faster site search.

   

2. Regional inventory protection (coming soon): To prevent geographical arbitrage, enhanced location validation will be implemented soon. The system verifies serial numbers against installation country locations to ensure devices are activated in their intended markets.

3. IQ Gateway update and replacement process: The app now automatically initiates cloud upgrades when installing new gateways with older firmware and manages the entire replacement process with status notifications and guided workflow.

   

4. Homeowner access management: Email changes for homeowner accounts are restricted after six months of system operation. To change ownership, homeowners must use the Transfer of Ownership service. Learn more about Transfer of Ownership.
5. Production meter enablement: Automated meter state management now disables production meters when microinverters are first added and requires revalidation for existing system configurations.
6. CT configuration flexibility: The app now allows switching between Load only and Load with solar modes during CT configuration without restarting the wizard.

For North America, Mexico, and Puerto Rico installers:

1. Battery configuration enhancement: Improved guidance for battery breaker configuration and oversubscription settings prevents mismatches between DER port selection and battery breaker details.

   

2. Storage CT validation: New jumper cable detection in the storage CT wizard checks L2 voltage before battery charge test to prevent misconfiguration and ensure proper system setup.

   

3. PV breaker monitoring: The enhanced monitoring system provides clear wiring instructions and automatically clears errors once proper connections are verified.

   

For APAC and EMEA installers:

1. Phase sequence validation: The app now includes a step to verify the grid-side wiring of the IQ System Controller for the correct phase sequence. This check is mandatory for three-phase backup sites.

2. Upload IQ System Controller checklist: The app advises installers to upload wiring and checklist images of the IQ System Controller for future system diagnostics.

   

3. IQ Gateway replacement flow enhancement: The streamlined gateway replacement process in the EMEA/APAC regions now offers clear choices between system extension and replacement with automated validation checks.

   

4. Power Export Limit updates: Power control settings have been reorganized with improved PEL configuration for IQ7 systems and streamlined access to ţţ�淨�r�� Power Control features.

   

5. Dynamic Load Balancing for IQ EV Charger: The app now supports configuration and power limiting for IQ EV Chargers through dynamic load balancing. The grid interconnection capacity field is mandatory for this feature.

   

6. IQ Energy Router system flexibility: IQ Energy Router support has been extended to allow IQ Battery installations with third-party string inverters, removing the requirement for ţţ�淨�r�� microinverters.
7. IQ Combiner Lite management: The app now implements specific microinverter quantity limits based on inverter models, with automated validation during system configuration.
8. Consumption meter validation: The ability to use Expert Mode has been removed when polarity issues or zero readings are detected in Consumption CT.

What’s fixed

• Device replacement validation: Enhanced security checks during device replacement now validate if devices are already commissioned on other sites before allowing replacement, preventing duplicate installations.

This release is being deployed via Google Play (Android) and App Store (iOS) upgrades.

What’s fixed

• [For IQ PowerPack 1500 users] Fixed issue where one hour of energy data was missing post DST change on Mar 9, 2025.

What’s New

For IQ PowerPack 1500 users:

1. Never Power Save and Never Power Off option for AC output

   Added option to never enter Power Save and Power Off mode.

   

What’s Fixed

• [For IQ PowerPack 1500 users] Fixed the issue where Profile is shown as Unknown in local connection view.
• [For IQ PowerPack 1500 users] Resolved bug when changing Light setting mode over local connection.
• [For IQ PowerPack 1500 users] Fixed redirect to Dashboard after registration on Android 11 and earlier versions.

What’s new

For all ţţ�淨�r�� App users:

1. Gateway Not Reporting banner on Status page

   Users are now notified with a clear banner on the Status page when the Gateway isn’t reporting data, along with steps to reconnect.

   

For IQ PowerPack 1500 users:

1. Never Power Save and Never Power Off option for AC output

   Added option to never enter Power Save and Power Off mode.

   

What’s Fixed

• Restricted changes to battery and profile settings in the ţţ�淨�r�� app during commissioning to ensure a seamless configuration.
• [For NEM 3.0 users] Updated AI Optimization algorithm to include main panel breaker rating to improve system performance.
• Resolved the issue preventing few users from accessing the app due to an internal server error.
• [For IQ PowerPack 1500 users] Resolved bug when changing Light setting mode.
• [For IQ EV Charger users in Europe] Fixed the issue where Allowed charging limit value was not getting honoured for Three Phase IT Grid configuration.

What’s new

For all installers:

1. Added an easy option to obtain system access permission from a homeowner

   • Installers can now use the Request System Access link on the Company Profile page to request system access from a homeowner.
   • Installers can request two types of access:
     • Maintainer
     • View Only

   

2. Added an option to check Battery Health

   • Installers can now check the Battery Health parameter in the IQ Batteries section of the Devices page by clicking on the Limited Warranty of the battery.
   • This feature gives installers additional insight into the system’s battery status and performance.

   

What’s fixed

• [For IQ EV Charger users in North America and Europe] Resolved an issue that frequently caused EV chargers' status to appear offline incorrectly.

What’s new

For all installers:

1. PV module compatibility calculator

   • The new Activations page now includes a link to the IQ Microinverter compatibility calculator, making it easier to check PV module compatibility with IQ Microinverters.

   

   

2. Improved workflow for navigating between battery and system 

   • Installers can now easily navigate between Battery Configuration and Profile Settings on the Activations page. A clearer separation ensures accurate redirection and displays relevant options based on battery count.

   

3. Enhanced subcontractor assignment functionality

   • Subcontractor assignment is now operational on the new Activations page, allowing both user and administrator roles to add authorized subcontractors as intended.

   

4. IQ Battery and IQ System Controller provisioning status on new Activations page

   • The new Activations page now includes IQ Battery and IQ System Controller details in the Provisioning section. This allows installers to see if these components have been provisioned and take any required actions.

   

For North America installers:

1. Grid Connection Type updates for all states: The Grid Connection Type field is now displayed for sites in all states across North America region, and not just limited to Illinois or California.

   • When a site is located in states other than Illinois or California, the Grid Connection Type field will display the following options:
      
     • Solar and/or Storage (with utility service)
     • Full Off-Grid (without utility service)

   

For APAC and EMEA installers:

1. Enhanced device validation for grey market prevention in EMEA

   • The ţţ�淨�r�� Installer App now includes region-based device validation during commissioning to maintain inventory integrity and prevent unauthorized cross-region installations.

   

What’s fixed

1. General bug fixes and improvements.

What’s new

For all ţţ�淨�r�� App users:

1. Gateway Not Reporting banner on Monthly Energy Report

   Monthly Energy Report now includes a banner to notify users if their Gateway isn't reporting data, along with steps to reconnect.

   

2. Added context for Permission Denied toast messages

   Users who are not the system owner will now see a message explaining they need to sign in with the owner's account to edit settings.

   

3. Details added on three-phase Live Status view

   To improve clarity regarding power flow, a note has been added to the phase selection page in Live Status.

   

For ţţ�淨�r�� App users with IQ EV Chargers in Bermuda:

1. Homeowners can create an IQ EV Charger only site

   Users in Bermuda can now create an IQ EV Charger only site using the ţţ�淨�r�� App. To add a charger, go to Menu -> Add Devices -> IQ EV Charger.

For ţţ�淨�r�� App users with SunPower migrated systems:

1. Estimated Warranty is now available

   Estimated Warranty is now displayed for third party inverters. To view, go to Menu > System > Devices > Third Party Devices > Estimated Warranty.

What’s fixed

1. Fixed Warranty dates for legacy and replacement devices.
2. Resolved the issue where Monetary Impact values were incorrect in specific cases.
3. Updated LED status in Live Vitals page to show Battery on standby when the battery DC switch is off due to low charge.
4. Resolved issue where production readings were missing for D380 Microinverters.
5. [IQ PowerPack 1500 users in US & Canada] Fixed an issue preventing the reset of IQ PowerPack 1500 from the app.
6. [IQ PowerPack 1500 users in US & Canada] Removed the Company and API Access Settings from Account > My Access Control page.

What’s fixed

For all IQ EV Charger users in North America and Europe

• Resolved an issue preventing Green charging from working for certain users.
• Fixed a bug that was causing Off-Peak schedules to be disabled in specific cases.

What’s fixed

For ţţ�淨�r�� App users with an IQ PowerPack 1500 in the United States and Canada:

1. Resolved an issue where users were unable to register their IQ PowerPack 1500 on Android 11 and earlier versions.  
2. Fixed the issue where the AC Ports state on the Profile page was not accurately reflected when the IQ PowerPack 1500 was connected to a load and the app was connected to the device via Bluetooth.
3. Resolved an issue that caused users to see an incorrect error screen on the IQ PowerPack 1500 during registration.
4. Updated messaging to provide clear instructions in the app when the IQ PowerPack 1500 is offline.

What’s fixed

For ţţ�淨�r�� App users with an IQ PowerPack 1500 in the United States and Canada: 

1. Bug fixes and minor enhancements.

What’s fixed

For ţţ�淨�r�� App users with an IQ PowerPack 1500 in the U.S. and Canada:

1. Resolved the issue where new users were not able to register their IQ PowerPack 1500 device.