Documentatiecentrum

Datasheets, technische instructies, certificeringsdocumenten en meer.



Filteren op
Regio
Producten
Uw selectie (4)
Alle documenten
(1)
PDF - 10.33 MB - Bijgewerkt May 08, 2024
(3)
IQ Gateway software release notes (8.2.4391)
December 11, 2024

IQ Gateway software version 8.2.4391 supports grid-tied (without backup) Solar Only and solar and storage systems. It also supports grid-forming (with backup) solar and storage systems with IQ8 Series, IQ7 Series, S Series and/or M Series Microinverters or third-party string inverters, along with AC Batteries, IQ Battery 3T/10T, or IQ Battery 5P and IQ System Controller 3 INT.

  • Countries: Australia, Denmark, Germany, Netherlands, New Zealand, and Sweden

    Denmark, Germany, Netherlands, and Sweden:

    #FeatureDescription
    1Bug fixesFor batteries connected to phases other than Phase A (Phase L1), the aggregate battery state of charge (SoC) was evaluated as zero. This issue has been fixed.

    Australia and New Zealand:

    #FeatureDescription
    1Emergency backstop support in Victoria via Common Smart Inverter Profile Australia (CSIP-AUS) for Solar Only systems or solar and storage systems with IQ7 or IQ8 Series Microinverters
    • To enable distribution network service providers (DNSPs) to remotely turn down or switch off rooftop solar systems in emergency situations when solar exports are too high, the Victorian emergency backstop via CSIP-AUS and IEEE 2030.5 communication standard is now supported.
    2System stability improvements
    • Improved phase imbalance management (PIM) for solar and battery systems.
    • Improved handling of grid transitions to ensure consistent and reliable operation in all modes.
    3IQ Battery 5P battery management unit improvements
    • Battery management units improved to enhance overall performance.
    4Bug fixes and security enhancements
    • Battery SoC did not show correctly for sites with batteries connected to multiple IQ Gateways. This issue has been resolved.
    • Increased the amount and frequency of data reported to the Å£Å£Íæ·¨ÙrÂÊ Cloud to enable quick backfilling of missing data in energy graphs in the Å£Å£Íæ·¨ÙrÂÊ App.
    • Enhanced security features.
  • Gateways supported: 
     
    • Denmark, Germany, Netherlands, and Sweden:  IQ Gateway Metered and IQ Gateway Standard
    • Australia and New Zealand: IQ Gateway Metered
  • Microinverters supported:
     
    • Denmark, Germany, Netherlands, and Sweden:  IQ8 Series, IQ7 Series, M Series, and compatible third-party string inverters
    • Australia and New Zealand: IQ8 Series, IQ7 Series, S Series, and third-party string inverters (Grid-tied solar plus storage systems only)
  • Batteries supported:
     
    • Denmark, Germany, Netherlands, and Sweden: IQ Battery 3T/10T, IQ Battery 5P, and AC Batteries
    • Australia and New Zealand: IQ Battery 5P
  • System controllers supported:
     
    • Australia and New Zealand: IQ System Controller 3 INT
  • Supported system configurations:  
     
    • Netherlands:
       
      • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
      • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
      • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
      • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 5P
      • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
      • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
      • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
      • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 3T/10T
      • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and AC Batteries
      • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries
      • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries
      • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and AC Batteries
      • Grid-tied Solar Only systems with IQ8 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
      • Grid-tied Solar Only systems with IQ7 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
      • Grid-tied Solar Only systems with M Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
    • Denmark, Germany, and Sweden:
       
      • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
      • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
      • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
      • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 3T/10T
      • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and AC Batteries 
      • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries
      • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries
      • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and AC Batteries 
      • Grid-tied Solar Only systems with IQ8 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
      • Grid-tied Solar Only systems with IQ7 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
      • Grid-tied Solar Only systems with M Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
    • Australia and New Zealand:
       
      • Grid-tied (without backup) Solar Only systems with IQ8 Series, IQ7 Series, or S Series Microinverters and IQ Gateway Metered
      • Grid-tied (without backup) solar and storage systems with IQ8 Series Microinverters, IQ7 Series Microinverters, S Series Microinverters, or third-party string inverters, IQ Gateway Metered, and IQ Battery 5P
      • Grid-forming (with backup) solar and storage systems with IQ8 Series, IQ7 Series, or S Series Microinverters, IQ System Controller 3 INT, and IQ Battery 5P

This release is being deployed via remote software upgrades for all systems in Denmark, Germany, Netherlands, and Sweden.

For Australia and New Zealand, this release is being deployed via remote software upgrades for all systems, excluding sites with AC Batteries, M Series Microinverters, and sites with older IQ Gateway software.

IQ Gateway software release notes (8.2.4265)
November 22, 2024

IQ Gateway software version 8.2.4265, as part of factory-built gateways, supports grid-tied systems with IQ8 Series, IQ7 Series, and/or M Series Microinverters or third-party string inverters along with the IQ Battery 3T/10T, IQ Battery 5P, or AC Batteries.

  • Gateways supported: IQ Gateway Metered and IQ Gateway Standard
  • Countries: Albania, Austria, Australia, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, India, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Malaysia, Mauritius, Namibia, Netherlands, New Caledonia, New Zealand, Philippines, Poland, Romania, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Thailand, Turkey, Great Britain, and Vietnam

    #FeatureDescription
    1IQ Battery 5P supportThe factory-built gateways will support grid-tied solar and storage systems with IQ8/IQ7 Series Microinverters or third-party string inverters and IQ Battery 5P in Belgium, France, Great Britain, Italy, Luxembourg, and Netherlands.
    2Dynamic tariff (DT) supportThe factory-built gateways will support dynamic tariff configurations in Belgium, Germany, and Netherlands to optimize system behavior for maximum savings.
    3Discharge-to-grid (DTG) supportThe factory-built gateways will support discharge-to-grid functionality in Germany and Great Britain to increase monetary benefit for homeowners by exporting excess energy to the grid at times with high export rates.
  • Microinverters supported: IQ8 Series, IQ7 Series, M Series, and compatible third-party string inverters
  • Batteries supported: IQ Battery 3T/10T, IQ Battery 5P, and AC Batteries
  • Supported system configurations:  
     
    • Belgium, France, Great Britain, Italy, Luxembourg, and Netherlands:
       
      • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
      • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
      • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 5P
      • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 5P
    • Austria, Switzerland, Germany, France, Belgium, Netherlands, Spain, Portugal, Denmark, Sweden, and Greece:
       
      • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
      • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
      • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
      • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 3T/10T
    • For all supported countries:
       
      • Grid-tied solar and storage systems with IQ8 Series Microinverters, IQ Gateway Metered, and AC Batteries
      • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries
      • Grid-tied solar and storage systems with M Series Microinverters and/or IQ7 Series Microinverters, IQ Gateway Metered, and AC Batteries
      • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and AC Batteries
      • Grid-tied Solar Only systems with IQ8 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
      • Grid-tied Solar Only systems with IQ7 Series Microinverters and IQ Gateway Metered or IQ Gateway Standard
      • Grid-tied Solar Only systems with M Series Microinverters and IQ Gateway Metered or IQ Gateway Standard

This release is being deployed via the factory for new gateways.

IQ Gateway software release notes (7.6.336)
December 8, 2023

IQ Gateway software version 7.6.336 supports IQ7 Series and M Series Microinverters along with IQ Battery 3T/10T and AC Battery for Germany, Belgium, Austria, France, Netherlands, and Switzerland.

  • Gateways supported: IQ Gateway Metered
  • Countries:  Austria, Belgium, France, Germany, Netherlands, Switzerland
  • Microinverters supported: IQ7 Series, M Series, third-party string inverters
  • Batteries supported: IQ Battery 3T/10T, AC Battery
  • Supported system configurations:

    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
    • Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 3T/10T
    • Grid-tied solar and storage systems with M Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
    • Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and AC Battery
    • Grid-tied solar and storage systems with M Series Microinverters, IQ Gateway Metered, and AC Battery

    #

    FeatureDescription

    1

    Bug fixes
    • Fixes the issue of multiple USB unplugged events observed in the Å£Å£Íæ·¨ÙrÂÊ Installer Portal.
    • Fixes the issue of microinverters, batteries, and other devices not reporting status by improving the Zigbee communication.
    • Fixes the issue of the Battery Management Unit (BMU) shutting down whenever the IQ battery is idle.
    • Fixes the issue of undesirable power consumption (tare loss) by the battery when in idle state.
    • Fixes the issue of IQ Battery maximum state-of-charge (SoC) being limited to 97% instead of 100%.
    • Fixes the issue of Phase Imbalance Management (PIM) getting enabled for single-phase systems.

     

    This release is being deployed via remote software upgrades for all systems.